PC-S
Manual Servomotor
Dia. Ø1~80
Standard grinding range (mm)
Ø455 x 205~305 x Ø228.6
Grinding wheel size (mm)
Ø255 x 205~305 x Ø111.2
Regulating wheel size (mm)
If you are serious about grinding accuracy and efficiency, the centerless grinders from PALMARY will meet your stringent challenges. The servo-controlled model is quality constructed throughout for delivering the operational performance that you expect.
The machine structure is manufactured from high-quality Meehanite cast iron, heat treated and stress relieved before machining, to make sure the high rigidity.
Precision Spindles
The GW spindle and the RW spindle are precision machined and made from alley steel, processed with normalization, aging, and heat treatment, then proceed to sub-zero treatment, finally finished after precision machining and grinding.
Feed Screw
The feed screw is manufactured from alloy steel. It's also normailzed, high frequency harden and precision ground in order to have high feeding accuracy and excellent wear resistance.
Pressure Switch
When starting the GW and RW spindle, this pressure switch allows starting only when oil enters into bearings thereby providing safety protection for the spindle bearings.
Lubrication System
The automatic lubricator provides lubrication to the GW spindle. Also all slideways are lubricated by a centerlized lubrication system, ensuring proper lubrication and feeding accuracy.
| Model | PC-18S | PC-1810S | PC-1812S |
|---|---|---|---|
| Grinding Wheel | |||
| Standard grinding range (dia.) | Ø1~Ø80 mm | ||
| Capacity increases with special arrangement | Ø40~Ø150 mm | ||
| Grinding wheel size (O.D. x width x I.D.) | Ø455 x 205 x Ø228.6 mm | Ø455 x 225 x Ø228.6 mm | Ø455 x 305 x Ø228.6 mm |
| Linear velocity | 33 M/s | ||
| Grinding wheel motor | 15HP x 4P (11 kW) | 15HP x 4P (11 kW) | 20HP x 4P (15 kW) |
| Regulating Wheel | |||
| Regulating wheel size (O.D. x width x I.D.) | Ø255 x 205 x Ø111.2 mm | Ø255 x 255 x Ø111.2 mm | Ø255 x 305 x Ø111.2 mm |
| Regulating wheel speed | 10~300 r.p.m. (variable speed) | ||
| Regulating wheel motor | 3 kW servo motor | ||
| Regulating wheel tilt angle | ±5° | ||
| Regulating wheel swivel angle | ±5° | ||
| Handwheel Graduation | |||
| Upper slide feed graduation | 3.5 mm/rev / 0.05 mm/graduation | ||
| Upper slide micro-feed graduation | 0.1 mm/rev / 0.001 mm/graduation | ||
| Lower slide feed graduation | 9 mm/rev / 0.05 mm/graduation | ||
| Lower slide micro-feed graduation | 0.2 mm/rev / 0.001 mm/graduation | ||
| Trimming device graduation | 2 mm/rev / 0.01 mm/graduation | ||
| Motor | |||
| Hydraulic pump motor | 1HP x 4P | ||
| Coolant motor | 1/4HP x 2P | ||
| Lubrication | Manual Lubricator | ||
| Tank | |||
| Coolant tank | 170 L | ||
| Hydraulic tank | 88 L | ||
| Lubrication | 0.6 L | ||
| Weight | |||
| New weight | 2900 kgs | 3000 kgs | 3400 kgs |
The mentioned specifications & dimensions are subject to change without notice.
ACCESSORIES
- Regulating wheel and flange x 1
- Grinding wheel and flange x 1
- Infeed work rest and carbide blade x 1
- Thrufeed work rest and carbide blade x 1
- Electric system x 1
- Hydraulic tank with pump x 1
- Coolant tank with pump x 1
- Diamond tools (2 pcs/set) x 1
- Work lamp x 1
- Tools (Leveling pad) and tool box x 1
ACCESSORIES
- Spare grinding wheel flange
- Spare regulating wheel flange
- Large work rest (thrufeed grinding) L : 250~500 mm
- Infeed grinding large workrest
- Wheel balancing stand and arbor
- Profile grinding attachment
- Auto. infeed attachment
- Manual feeder for infeed grinding (up and down)
- Hydraulic work ejector (infeed grinding)
- Auto. loading and unloading attachment (infeed grinding)
- Auto. loading attachment (thrufeed grinding) (Ø5~20 mm, L100~600 mm)
- Auto. unloading attachment (thrufeed grinding)
- Auto. feeder for thrufeed grinding (hopper type) (Ø2~8 mm, L50~180 mm)
- Vibratory feeder (thrufeed grinding)
- V type supporter for long bar grinding (Ø2~14 mm)
- Magnetic coolant separator
- Paper filter
- Hydrocyclone coolant separator
From Your Industry
