PALMARY high precision cylindrical grinders are unmatched in structural rigidity and stability, grinding accuracy and operational convenience. Each machine provides maximum operational flexibility thereby allowing for various grinding operations. You will get extra value when putting a PALMARY cylindrical grinder on your production line.
Stable and rigid spindle headThe spindle runs on precision bearings, assuring maximum spindle stability. It guarantees outstanding grinding accuracy for external dia., internal dia. (optional) & end face.
Precision wheel headThe grinding wheel spindle is precision machined from high quality alloy steel, normalized, tempered, carburized and sub-zero treated, precision ground and mirror-effect treated.
Special hydrostatic bearingThe wheel spindle runs by using a special hydrostatic bearing and is especially ideal for precision grinding work. It features high speed, no friction between metals, no heat generation, deformation-free, extra high accuracy and continual use.
Various grinding applicationOne grinder allows straight plunge grinding, shoulder grinding, traverse grinding, end face grinding, taper grinding & internal grinding (optional) functions for different machining purpose.
|Distance between centers||600 mm|
|Swivel over table||Ø320 mm|
|Max. load of centers||100 kg|
|Max. external grinding diameter||Ø300 mm|
|Manual distance||160 mm|
|Auto. rapid advance||40 mm|
|Sliding seat supplementary displacement||95 (total 295) mm|
|Min. setting unit (micro-adjust)||0.001 mm|
|One turn of handwheel (graduation)||2 (0.005) mm|
|O.D. x width x I.D.||Ø405 x 50 x Ø127 mm|
|Speed (belt type)||1783 r.p.m. (50 Hz) / 1940 r.p.m. (60 Hz)|
|Work spindle head|
|Swivel angle||120° (+90°, -30°)|
|Center taper||MT. 4|
|Spindle speed (variable)||10~300 r.p.m.|
|Max. load of spindle (tool holder includer)||35 kg (max. length : 150 mm)|
|Taper center||MT. 4|
|Swivel angle||-2° ~ +10°|
|Traverse speed||50 / 5400 mm/min|
|Auto. reciprocate min. stroke||8 mm|
|Feed of one turn of handwheel (2-step)||20 mm (2 mm)|
|Wheel spindle||3.7 kW (4 P)|
|Workhead spindle||0.85 kW|
|Hydraulic pump||0.37 kW (4 P)|
|Wheel spindle lubrication pump||0.18 kW (4 P)|
|Coolant pump||0.18 kW (2 P)|
|Internal grinding spindle (opt.)||0.75 kW (2 P)|
|Wheel spindle lubricant tank||7 L|
|Hydraulic tank||63 L|
|Coolant tank||110 L|
|Net weight||2600 kg|